Model UVGMD-AL-HMI Atmospheric/Vac Only/Vac with Gas Flush/Multi Flush

PRINTABLE PDF

DIXIE MODEL UVGMD-AL-HMI VACUUM, GAS FLUSH AND MULTIFLUSH WITH TIMED DELAYS

Description

Model Uvgmd-al-hmi With Four Operating Modes:

Atmospheric/Vacuum Only/Vac with Gas Flush/Multiflush with Timed Delays. CE/UL Rated .75 HP Gearhead Motor Drive And Electronically Controlled Clutch-Brake/Air Lift/Vacuum System, 110/115 Vac, 50/60 Hz, 20 Amps. Vacuum Up To 29.8"Hg, Gas Flush To 1"Hg. Program Values, Cycles, Timed Delays, Change Operating Modes, and Quick Reference Operating Instructions are Displayed on 7" HMI Touch Screen.

RANGE:

2" to 6-1/4" Diameter up to 7" Tall. Option for Taller Cans.

SPACE:

7” Chamber – 28” x 34”
15” Chamber – 28” x 46”

HEIGHT:

7” Chamber – 73”
15” Chamber – 81”

SHIPPING:

7” Chamber - 625 Pounds
15” Chamber - 725 Pounds

OPTIONS:

Customized to close 6 5/8" diameter cans or smaller than 2" dia - Request Quotation
Transformer/vacuum pump for 220 volts, 50 Hz, 1-phase - Request Quotation

Advantages

  1. Set Vacuum to 29.8" (725 mm) Hg
  2. Set Gas Flush to 1” Hg
  3. Set Vacuum and Gas Flush to 10 Cycles
  4. Set Vacuum and Gas Flush Timed Delays (Dwell) From 0.1 to 10 Seconds
  5. Set to Close after Gassing or After Vacuum
  6. Counts Cans Closed in Four (4) Operating Modes
  7. Reminds the Operator to Clean and Oil After 5,000 cans
  8. Change From One Can Size to Another Can Size and Reset Controls in Minutes
  9. Four Different Operating Modes Provide Endless Research Capabilities/Possibilities.

MULTIVERSA COMMAND CENTER 7” HMI TOUCH SCREEN

Each function, Set Value, Cycle and Time Delay May be Adjusted On-Screen with the Touch of a Finger. The Operating Function is Monitored On-Screen During Each Seaming Cycle.

Canning Machines

EXPORT BOXING

(7" Chamber) SHIPPING: 625 pound - Request Quotation

EXPORT BOXING

(15" Chamber) SHIPPING: 725 pounds - Request Quotation

Capacity

Dixie Seamer

TO OPERATE:

To Operate Model UVGMD-AL-HMI: Use Touch Screen to Select Operating Mode, Set Values for Vacuum, Gas Flush and Timed Delays. Position Filled Can and Lid. The Set Values, Cycles and Delays are Performed Precisely and Repetitiously Each Time the Vacuum Chamber Door is Closed, and Before the Can and Lid are Joined and Hermetically Seamed. Requires 90 PSI/5 CFM Compressed Air to Operate.

See Video Here

(706) 549-1914 QUOTE REQUEST